WINIX HR1000 Bedienungsanleitung

Care and Maintenance

Care and Maintenance FILTER CARE 2. Cleaning the Pre-filter Intervals between filter cleanings may vary depending on the air quality. Use a vacuum cleaner or soft brush to clean the Pre-filter. If it is excessively dirty, wash with room temperature water. • xUse only water, do not use volatile substances such as alcohol or acetone. If the pre-filter becomes damaged or in any way needs replacement: Please contact your local dealer XX Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration. XX The Pre-filter is reusable after cleaning. XX Do not use hot water over 104°F or volatile fluids such as paint thinner. XX After washing the pre-filter, allow it to dry completely in a wellventilated area. Otherwise, it may develop a bad odor. English HR 1000 16

Care and Maintenance FILTER CARE 3. Filter Assembly and Replacement Filters should be re-installed in the reverse order of their removal. 1 Insert the replacement 3 Anti-microbial True HEPA filter (rear) 2 CD Carbon filter (middle) • xRemove the protective plastic wrap from new filters. Operating the unit without removing the protective plastic wrap may cause abnormal noise, deformation, or fire as a result of overheating. 3 Anti-microbial True HEPA filter 2 CD Carbon filter 2 Insert the 1 Pre-filter (front). • xTo install the pre-filter, insert bottom tabs into the slots on either side of the lower part of the unit, then rotate upward to insert the upper tabs into the slots at the top part of the unit until both sides audibly click into place. 3 Replace the front panel by first inserting the latch at the bottom edge into the base of the unit, then rotate the panel upward toward the top of the unit until it magnetically snaps closed. English HR 1000 17